Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultramid® B4WG7 BK102 - PA6-GF35 - BASF

Material Data Center offers the following functions for Ultramid® B4WG7 BK102:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultramid B datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Mechanical properties - Thermal properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Product Texts
Ultramid® B4WG7 BK102 is a high viscosity grade of PA6 reinforced with 35% glass fiber offering high strength and stiffness as well as creep resistance. Excellent melt strength makes Ultramid® B4WG7 BK102 ideally suited for extrusion and blow molding.
Mechanical propertiesdry / condUnitTest Standard
ISO Data
Tensile Modulus 11500 / - MPa ISO 527
Stress at break 183 / - MPa ISO 527
Strain at break 2.5 / - % ISO 527
Charpy impact strength, +23°C 72 / - kJ/m² ISO 179/1eU
Charpy notched impact strength, +23°C 10 / - kJ/m² ISO 179/1eA
Charpy notched impact strength, -30°C 8 / - kJ/m² ISO 179/1eA
Thermal propertiesdry / condUnitTest Standard
ISO Data
Melting temperature, 10°C/min 220 / * °C ISO 11357-1/-3
Temp. of deflection under load, 1.80 MPa 203 / * °C ISO 75-1/-2
Other propertiesdry / condUnitTest Standard
Density 1410 / - kg/m³ ISO 1183
Characteristics
Processing
Other Extrusion, Blow Molding
Delivery form
Black
Features
Creep Resistance, Melt Strength
Regional Availability
North America
Other text information
Injection molding
PROCESSING
injection molding, Melt temperature, range: 254 - 271 °C
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.